Tower Crane Anti-Collision and Zone Protection Monitoring System

CXT/90IIB Anti-collision and zone protection system can be used in all models of tower cranes. The system shows the visual and clear picture covering the working states of tower cranes. It can modify parameters wirelessly through a portable computer without climbing up the tower cranes by the operators. With the advanced technology, the system can control and deal with on-site construction problems and promise an effective and safe running for the operator.
Functions are shown as follows:

1. Tower Crane Anti-collision Protection
The system works by anticipating the possible collision. When the system detects a threat, it will control and handle it effectively.

2. Zone (Obstacle) Anti-collision
The system can determine up to 10 prohibited zones in which the hook or jib are not allowed to operate.

3. Boundary Protection
The system can be preset with an up to 30 point boundary protection area in which the operating or over-flying of hook is not allowed.

4. Pre-alarm/Alarm & Control
Once monitoring the pre-set data for possible collisions in crane interference area and over-flying of sensitive areas, there will be pre-alarm and the system will stop the maneuver automatically
 
System Composition
1)1 set Display and Mainframe
2)1 set Amplitude Travelling Sensor and Cable (Angle Sensor for Luffing Tower Crane)
3)1 set Slewing Sensor and Cable
4)1 set Multiple Control Output Cable
5)1 set Communication System
6)1 set Ground Monitoring System (Optional)